Corrigé 3.3 Disquettes et outils DOS

[tux]# dmesg  
... 
[12062.511390] usb 4-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd 
[12062.537085] usb 4-1: New USB device found, idVendor=0951, idProduct=1666, 
bcdDevice= 0.01 
[12062.537087] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 
[12062.537088] usb 4-1: Product: DataTraveler 3.0 
[12062.537089] usb 4-1: Manufacturer: Kingston 
[12062.537090] usb 4-1: SerialNumber: 60A44C413841F2A1A9955400 
[12062.543690] usb-storage 4-1:1.0: USB Mass Storage device detected 
[12062.544220] scsi host33: usb-storage 4-1:1.0 
[12063.582631] scsi 33:0:0:0: Direct-Access     Kingston DataTraveler 3.0      PQ: 0 
ANSI: 6 
[12063.583738] sd 33:0:0:0: Attached scsi generic sg2 type 0 
[12063.585703] sd 33:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB) 
[12063.587178] sd 33:0:0:0: [sdb] Write Protect is off 
[12063.587180] sd 33:0:0:0: [sdb] Mode Sense: 4f 00 00 00 
[12063.588046] sd 33:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't 
support DPO or FUA 
[12063.600002]  sdb: sdb1 
[12063.604688] sd 33:0:0:0: [sdb] Attached SCSI removable disk 

L’avant-dernière ligne de cet exemple indique que la clé USB a été reconnue sous le nom /dev/sdb et qu’elle comporte une partition nommée /dev/sdb1.

On peut retrouver ces informations à l’aide de la commande lsblk :

[tux]$ lsblk 
NAME    ...